Support for Windows 10 ended on 14 October 2025, and free extended security updates now run to 12 October 2027, as we explain in our Windows 10 end-of-support guide. That gives you time, but sooner or later most people face the same question: can my PC run Windows 11? Microsoft’s requirement list is short, yet two items, TPM 2.0 and Secure Boot, catch many owners out. This guide shows how to check everything in about ten minutes and what to do if your PC fails.

The minimum requirements
These are the hardware minimums listed by Microsoft Learn and Microsoft Support, with the memory and storage figures confirmed by PC Gamer.
| Component | Minimum |
|---|---|
| Processor | 1 GHz or faster with two or more cores, on Microsoft’s list of compatible 64-bit processors |
| Memory | 4 GB RAM |
| Storage | 64 GB or larger |
| System firmware | UEFI with Secure Boot capability |
| TPM | Trusted Platform Module version 2.0 |
| Graphics | DirectX 12 or later with a WDDM 2.0 driver |
| Display | HD (720p), larger than 9 inches diagonally, 8 bits per colour channel |
Pureinfotech reports that Windows 11 25H2 and 26H2 keep the same minimums as 24H2, so a PC that passes today should not be caught out by the newer versions. Windows 11 Home also needs an internet connection and a Microsoft account to finish setup, according to Microsoft Learn.
Step 1: run the PC Health Check app
Microsoft’s PC Health Check app is the quickest test. Tom’s Guide says to download it from the official Windows 11 page, open it and select Check now. PC Gamer says that if your PC fails, the app lists the reasons so you can see what to fix, and XEOX adds that the detailed results show items such as CPU generation, TPM status and Secure Boot. One caution from Tom’s Guide: if the app cannot find a TPM, that does not always mean your PC lacks one, because it may simply be switched off.
Step 2: check TPM and Secure Boot yourself
If the app is unclear, two built-in tools give a direct answer. A Microsoft Community reply explains the process: press the Windows key plus R, type tpm.msc and press Enter to see the TPM version, then repeat with msinfo32 to see the Secure Boot state. Punch Technology adds that the boot mode should be UEFI rather than Legacy.
| Where you look | What you see | What it means |
|---|---|---|
| tpm.msc | Specification version 2.0 | TPM requirement met |
| tpm.msc | Version 1.2 or no TPM found | Enable TPM 2.0 in the BIOS or UEFI settings, or the PC may not support it |
| msinfo32, Secure Boot State | On | Secure Boot requirement met |
| msinfo32, Secure Boot State | Off | Turn it on in the BIOS or UEFI settings |
| msinfo32, BIOS Mode | UEFI | Correct boot mode |
| msinfo32, BIOS Mode | Legacy | Needs UEFI, see the warning below |
Step 3: fix the common blockers
- TPM switched off. Digital Citizen says most PCs from around 2016 onwards have TPM 2.0, either as a chip or as firmware. ITPro suggests entering the BIOS, looking in the security section for TPM and enabling it. On many boards it appears under a brand name such as fTPM on AMD or PTT on Intel.
- Secure Boot off. In the same UEFI menu, switch Secure Boot to enabled. XEOX says that if Legacy or CSM boot is active you may need to switch it off first.
- Older desktop with no TPM. ITPro says some motherboards accept a plug-in TPM module, so check the manual before buying a new PC.
- Processor not supported. iTechtics gives 8th generation Intel as a rough guide, but Microsoft publishes the official Intel and AMD lists, as Punch Technology notes, so check your exact chip.
- Not enough storage. You need 64 GB at the very least, and updates need more, so see our guide to freeing up space on a Windows laptop.
Be careful with Legacy boot mode. If Windows is installed in Legacy mode, do not simply flip the switch: back up first and follow Microsoft’s guidance to convert the disk, because changing the boot mode on its own can stop Windows from starting. Our 3-2-1 backup guide shows a safe way to protect your files before you change anything.

What if your PC fails the check?
| Option | Best for | Watch out for |
|---|---|---|
| Stay on Windows 10 with extended updates | Buying time until October 2027 | Selectra lists three UK routes to the free updates, and TechRepublic says managed devices are excluded |
| Replace or upgrade the hardware | A long-term fix | Cost, plus backing up and moving your files first |
| Install on unsupported hardware | Experienced users only | Geekrewind says Microsoft does not recommend it, and OnMSFT warns the PC is left in an unsupported state |
Think of the free update route as a bridge rather than a destination, because security updates for Windows 10 stop again in October 2027.
More in Tech
Before you upgrade
- Back up your files and photos.
- Free up at least 64 GB of storage and keep spare room for updates.
- Run PC Health Check again after any BIOS change. Punch Technology notes that Windows Update may use cached compatibility data that does not refresh immediately.
- After upgrading, tidy things up with our guide to speeding up Windows 11 startup, or try the slow Windows PC guide on an older machine.
Frequently asked questions
PC Health Check says my PC passes, but Windows Update says it does not. Why?
Punch Technology explains that Windows Update can use cached compatibility data that does not refresh straight after a BIOS change, so restart and check again.
Are TPM 2.0 and Secure Boot the same thing?
No. They are separate requirements and Microsoft lists both, so a PC can have one switched on and the other off.
Do the requirements change for newer versions of Windows 11?
Pureinfotech says versions 25H2 and 26H2 keep the same minimums as 24H2.
Do I need a Microsoft account?
Microsoft Learn says Windows 11 Home needs an internet connection and a Microsoft account to complete first-time setup.
Sources checked: Microsoft Learn, Microsoft Support, PC Gamer, Tom’s Guide, Digital Citizen, ITPro, XEOX, iTechtics, Punch Technology, Pureinfotech, Geekrewind, OnMSFT, Selectra and TechRepublic.




